Home Audiophile Earbuds Manuals
The JBL Tune 130NC TWS comes with Active Noise Cancelling technology, a 10mm dynamic driver, a battery life of around 8 hours + 32 hours using the charging case, the IPX4 splash, and dust-proof certification, a specialized app, and much more. Learn how to use them with this new JBL Tune 130NC TWS Manual.
What's Inside
JBL Tune 130NC TWS Manual | Everything You Need To Know!
JBL Tune 130NC TWS Manual | How to Pair / Connect?
JBL Tune 130NC TWS Manual | How to Turn On and Off?
JBL Tune 130NC TWS Manual | How to Wear?
How to Control? / How to Operate? – Instructions
JBL Tune 130NC TWS Manual | How to Activate ANC?
JBL Tune 130NC TWS Manual | How to Activate Mono Mode?
JBL Tune 130NC TWS Manual | How to Charge?
JBL Tune 130NC TWS Manual | How to Reset?
JBL Tune 130NC TWS Manual | LED Light Status
A Guide To JBL Tune 130NC TWS APP
Some Common Earbuds Problems & Troubleshooting
FAQs
JBL Tune 130NC TWS Manual | Everything You Need To Know!
JBL Tune 130NC TWS Manual | How to Pair / Connect?
To iOS and Android phones
Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Step 2: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.
Step 3: Go to the device’s Bluetooth settings.
Step 4: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.
Step 5: After that, a blue light will turn on, and the pairing will be done.
To PC (Windows)
Step 1: Turn on Window’s Bluetooth.
Step 2: Go to the settings.
Step 3: Go to “Bluetooth and other devices”.
Step 4: Click on “Add device”.
Step 5: Click on Bluetooth.
Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Step 7: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.
Step 8: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.
Step 9: After that, a blue light will turn on, and the pairing will be done.
JBL-Tune-130NC-TWS-Manual-1
JBL Tune 130NC TWS Manual | How to Turn On and Off?
Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.
JBL Tune 130NC TWS Manual | How to Wear?
Step 1: Take both earbuds out of the charging case.
Step 2: Identify the left and right earbuds.
Step 3: Choose the ear tips that best suit your ears.
Step 4: Insert the headphones into the inner canal of the ears.
Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.
JBL-Tune-130NC-TWS-Manual-2
How to Control? / How to Operate? – Instructions
Play or pause music: Press the multifunction touch button on the right earbud one time.
Play the next song: Press the multifunction touch button on the right earbud two times.
Play the previous song: Press the multifunction touch button on the right earbud three times.
Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
End a current call: Press the multifunction touch button on any of the earbuds two times.
Mute or unmute a call: Press and hold the multifunction touch button on any of the earbuds for 5 seconds during the call.
Activate Talkthru: Press the multifunction touch button on the left earbud two times.
Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 5 seconds.
The JBL Tune 130NC TWS comes with Active Noise Cancelling technology, a 10mm dynamic driver, a battery life of around 8 hours + 32 hours using the charging case, the IPX4 splash, and dust-proof certification, a specialized app, and much more. Learn how to use them with this new JBL Tune 130NC TWS Manual.
What's Inside
JBL Tune 130NC TWS Manual | Everything You Need To Know!
JBL Tune 130NC TWS Manual | How to Pair / Connect?
JBL Tune 130NC TWS Manual | How to Turn On and Off?
JBL Tune 130NC TWS Manual | How to Wear?
How to Control? / How to Operate? – Instructions
JBL Tune 130NC TWS Manual | How to Activate ANC?
JBL Tune 130NC TWS Manual | How to Activate Mono Mode?
JBL Tune 130NC TWS Manual | How to Charge?
JBL Tune 130NC TWS Manual | How to Reset?
JBL Tune 130NC TWS Manual | LED Light Status
A Guide To JBL Tune 130NC TWS APP
Some Common Earbuds Problems & Troubleshooting
FAQs
JBL Tune 130NC TWS Manual | Everything You Need To Know!
JBL Tune 130NC TWS Manual | How to Pair / Connect?
To iOS and Android phones
Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Step 2: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.
Step 3: Go to the device’s Bluetooth settings.
Step 4: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.
Step 5: After that, a blue light will turn on, and the pairing will be done.
To PC (Windows)
Step 1: Turn on Window’s Bluetooth.
Step 2: Go to the settings.
Step 3: Go to “Bluetooth and other devices”.
Step 4: Click on “Add device”.
Step 5: Click on Bluetooth.
Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Step 7: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.
Step 8: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.
Step 9: After that, a blue light will turn on, and the pairing will be done.
JBL-Tune-130NC-TWS-Manual-1
JBL Tune 130NC TWS Manual | How to Turn On and Off?
Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.
Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.
JBL Tune 130NC TWS Manual | How to Wear?
Step 1: Take both earbuds out of the charging case.
Step 2: Identify the left and right earbuds.
Step 3: Choose the ear tips that best suit your ears.
Step 4: Insert the headphones into the inner canal of the ears.
Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.
JBL-Tune-130NC-TWS-Manual-2
How to Control? / How to Operate? – Instructions
Play or pause music: Press the multifunction touch button on the right earbud one time.
Play the next song: Press the multifunction touch button on the right earbud two times.
Play the previous song: Press the multifunction touch button on the right earbud three times.
Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
End a current call: Press the multifunction touch button on any of the earbuds two times.
Mute or unmute a call: Press and hold the multifunction touch button on any of the earbuds for 5 seconds during the call.
Activate Talkthru: Press the multifunction touch button on the left earbud two times.
Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 5 seconds.
Open up